https://www.youtube .com/watch?v=E2BSAJPGe8g
http://qualitysilverbullion.com/silver-bullion-conversion/ This video features the process of converting your oversized silver bars to manageable silver rounds in 3 easy steps. Give us a call or check out our website to find out more about how you can liquidate your oversized silver bars. and let us be your favorite mint.
Related posts:
Silver Price Surging More Than 7% - Physical Bullion In Short Supply
Silver Under $20... Again! Here Are Our Thoughts - Peter Grandich
The Reason Gold & Silver Keep Falling (And Why They Will Go MUCH Higher)
Silver Depleting From the Comex | Will This Trend Continue? - David Morgan
Silver SOLD Out Shutting Down Supply - Andy Schectman | Silver bullion
Warning 🚨: Something Far BIGGER Is Happening with Gold & Silver - Lynette Zang | Gold Silver Price
$10,000 in Silver vs Gold!
WARNING TO THE FED - Part 1
Deep Recession Dead Ahead As Central Bankers Empty the Punch Bowl.
2022 Koala 1oz Silver Bullion Coins From the Perth Mint
I Think That These Are The BEST Coins To Have To Celebrate Her Majesty The Queen - What I Am Buying!
Debt Bubble Exploding | Is The Fed Trapped? - Brien Lundin
What’s the cost if say I send 1000 ounces is it 5 percent of the silver does it change as silvers falls or rises
I would only see doing this option if I was a miner and need me some silver coins
A part of me laughed while a little part of me died inside.
Spoke with a customer yesterday who was excited because they didn’t know we offered this. Just wanted to make sure you knew too… #silverconversion #silver #minting
I highly doubt they convert your silver into rounds, rather they just weigh what you send and then send you an equal amount in rounds that have already been produced. Charging you a percentage for converting rounds that are already made. At some point the silver you sent to them just ends up being converted into rounds the next time they fire up the press to make more product.
No problem. Trolling silver?!
Trollilng my comment !! next time you have an objective view try leaving a decent comment on the actual subject instead of condescending to the author. Your probably an employee of this company which is why you tried sounding clever, but now your just getting tore up. Asshat !!
+Joel when they’re charging you a premium for the service as if they’ve done all the melt work then yes I would care. This seems like a scam to me.
+shwackthenoobsac What you guys don’t get is that they do the melt, roll forming, punching of blanks, and punching of coins. As long as you’re sending in the same quality of silver as you receive why not be happy? Is it because they make a bit of a profit? They have a building, insurance, employees, machinery, and a host of other things to pay for. Nobody is in business to lose money or break even. Imagine this….. You send in a thousand ounce brick and you agree for the upfront cash charge to get 1000 1 oz coins. If you got your same exact silver back it would be nearly impossible. After the blanks are pressed, say you have 15-20% that has to me remelted and rolled to make new blanks. Then 15-20% of that needs to be remelted and rolled….. Keep repeating until you have exactly 1 oz left…. How are they to make a coin of that? My stand is, if you are getting what you gave, with a reasonably up charge, be happy.
Yes that’s exactly what they do
Your scam is hilarious . And I find it smart and funny .
Captain Howdy
How is it a scam
If I send you a 1000 oz bar ? Can you make me 1/2 gram rounds ? And what would it cost to do so ?
And can I get gold kilo bars made with tungsten steel center ? And what would it cost ? And can you stamp Perth mint on it ?
send them .9999 get .999
No chance of being my favorite mint. I’ll stick with mentos soft mints.
yes I have 1 1/2 ton of silver and would like it covert to gold?
I see a a loss a bad loss on doing this.. of i cant gain bit it costs me either way i go with it why deal with you? Youre gonna have to give me something better than charging me to convert apple to apple like that otherwise i lose what i stood to gain. So heres where i am with it. Of i need to put my larger bars into a more manageable denomination , why dont i invest in a metal cutting bandsaw blade ? Not everyone has a foundry but i do. So why would i lose money buy paying to convert when i can melt , refine, and pour exactly the same denomination here at home? Im saying if the benefit is all in your favor where does my interest become protected or at least apple for apple. Of i have 9999 silver why would i convert down to a 999 silver and pay to do it? Blows my entire gain to bits..
Something is off with this jiffy, I won’t trust you with my silver but I’ll buy a shamwow !
واحد يترجم وفقكم الله
You’re ridiculously handsome.
Too bad we can’t convert all the ugly peoples into you.
What a tool.
So what if you have to buy a car? Pay with bags and bags of 1oz? I have a feeling Bullion companies are selling fears to gain more sales. They’ll be happy to take all your so called fiat currency.
That is cool! So if I wanted to, say make a custom poker chip set? Or a custom coin set? Y’all can help?
What is the tax implication? Will it be treated like selling 1,000 ounces, with capital gains, and then a reinvestment?
@Greg Gergen But then why don’t more people buy 1,000 ounces of silver, mint them and then resell? You’d think the arbitrage opportunity would disappear as people did that.
@FortNikitaBullion That is what brought me to this Youtube video. I am looking at buying bars off the Comex and making rounds for resell.
@Greg Gergen Have you researched the tax implications? What gets me nervous is that collectibles are taxed at a higher rate. Which is one reason I want to break up my 1,000 ounce silver bar as smaller rounds don’t generate as much paperwork. Does this company send any sort of report to the IRS when you break 1,000 ounces?
@FortNikitaBullion Freshly minted coins are not collectibles.
@FortNikitaBullion You would have to call the company and ask them. About all the way probably do at worse is send you a receipt for converting a bar into rounds. They would no more or no less send you paperwork than if you took a bunch of lumber to a cabinet maker and they made the lumber into cabinets. They are basically in the metal processing business.
do you have any silver rounds on hand for sale?